ACE4/BLE4
ACE4 inverter is suitable for controlling several
types of motors (AC induction, BLDC and PMAC)
in the range from 15 kW to 30 kW continuous
power, adopted in battery-powered trucks for
material handling.
It can be supplied in two configurations:
- Standard version: with a 23-poles connector
- Premium version: with a 35-poles connector for enhanced I/O
The high number of I/O accommodates a wide
range of vehicle controls and sensors. ACE4 can
also easily interface with a wide range of external
devices via CAN bus.
Technical Specifications
I/O
- 23-pins Ampseal
- 35-pins Ampseal
Max Current
900 - 1000
Motor Technology
- ACIM
- PMAC
Other Features
- 16 bits microcontroller for main functions
- 576+ Kbytes embedded Flash memory
- 16 bits microcontroller for safety functions
- 320+ Kbytes embedded Flash memory
- Up to 8 active high digital inputs
- Up to 4 analog inputs (range 0÷10V) with 10 bit resolution
- 3 active low digital inputs
- 1 analog motor thermal sensor input
- 1 incremental encoder interfaces
- 1 CAN communication port that allow interconnection to a wide range of devices
- Standard communication: CIA, CANopen
- Communication speed up to 500Kbit/sec
- 11 and 29 bits communication supported
- +12V / +5V output supply (up to 150mA)
- 1 power low side output with precise current feedback to control proportional hydraulic valves (up to 1,5A continuous)
- Up to 4 PWM voltage control low side outputs
- Up to 2 ON/OFF voltage control low side outputs
- Built-in freewheeling diodes
- Different built-in programmable levels for dither amount & frequency
- Overload protection, short circuit protection and open load protection
- ESD protection
- Operating ambient temperature range from -40°C to + 40°C
- Sealed connector (23 or 35 pins Ampseal)
- Easy access to service, status and diagnostic information
Power Section
- 15 kW to 30 kW continuous
Voltage
36, 48, 72, 80, 96, 120